Soft99 Glaco Blave

A key reason to choose Soft99 Glaco Blave is its suitability for both glass and transparent resin. Its water-repellent ingredients adhere to microscopic surface irregularities and form a coating, helping rainwater slide off and reducing residual water droplets.

Suitable areas include front windscreens and transparent resin parts such as headlight covers, side visors and rear light covers. It can also be used on motorcycle fairing screens and protective goggles. The formula also helps reduce dirt adhesion and the effects of UV rays, condensation and winter icing.

Capacity: 70ml, enough for multiple applications. No drying time is required: apply the product to a clean surface, then wipe with a cloth to complete the water-repellent treatment.

https://www.youtube.com/embed/L9_-_N6BOGo

• Before use, completely remove all dirt from the surface to be treated and ensure it is dry, with no water droplets remaining.Remove the cap Squeeze the sides of the bottle to release the liquid and apply over the entire surface to be treated Wipe with the supplied dedicated towel to finish
• Complete each part separately
• Use the wiping towel dry

• Glass and transparent resin, including front windscreens, headlight covers, rain visors, rear light covers, motorcycle fairing screens and goggles.

• ●Do not use for any other purpose.
• Check the vehicle owner's manual before use.
• Ensure the liquid does not splash onto surfaces other than the intended surface. If liquid gets onto other areas, wipe it off immediately, as it may cause deformation or discolouration.
• Do not point the felt side towards anyone when opening the cap.
• Ensure the felt surface is in close contact with the surface to be treated to prevent splashing. Keep your eyes away from the felt surface.
• Do not use in hot weather or when the surface to be treated is hot.
• If the temperature is below 10°C, work while warming the glass with the heater or demister. Avoid use below 0℃, as it is difficult to achieve the desired effect.
• Do not leave the liquid on for a prolonged period, as it may affect the surface or cause an uneven finish.
• If sand or small stones adhere to the felt or cloth, rinse thoroughly with water and dry completely before use, otherwise scratches may occur.
• On first use, existing coatings, oily film, dirt or other deposits may prevent the product from achieving its full effect. In this case, prepare the surface with an abrasive glass oil-film remover before use. For transparent resin, wash with car shampoo or a cleaner before use.
• After use, ensure the surface remains transparent and that lighting, the field of view and visibility are not affected.
• When there is a large temperature difference between the inside and outside of the vehicle, such as on humid mornings or at night, be aware that the wipers may cause momentary white haze.
• Do not use screenwash containing an oil-film remover. Use water-repellent screenwash (Glaco screenwash).
• If the water-repellent coating becomes uneven due to usage conditions or time in use, making it difficult to see ahead, reapply the product.
• Replace damaged wiper blades, otherwise they may malfunction (Glaco super water-repellent wiper blades are recommended).
• Wash your hands thoroughly after use.
• Precautions for use on transparent resin
• Do not press or rub hard during application or wiping, as this may cause scratches or deformation.
• When cleaning the vehicle, avoid abrasive cleaners or vigorous scrubbing.
• Depending on the special treatment or resin material, it may be difficult to achieve the desired effect.
• Test on an inconspicuous area before use.
• ●Do not inhale or drink: do not inhale or drink, as it is harmful to the body.
• People with sensitive skin should wear protective gloves to avoid rashes.
• Flammable; keep away from sources of ignition.
• In backlit conditions or when leaving a dark environment such as a tunnel, temporary whitening may occur. Activate the wipers immediately to ensure visibility.
• Keep out of reach of children.

Silicon, alcohols

Delivery is available to a specified address, SF Locker or convenience store; free delivery for discounted goods totalling HK$200 or more, otherwise delivery charges are payable on receipt.