Soft99 Glaco Mouse-Type Oil Film Remover and Glass Water Repellent

Soft99 Glaco Mouse-Type Oil Film Remover and Glass Water Repellent comes in a 70ml size. It uses special fine cleaning molecules to help remove dirt and excess oil film from glass while applying a water-repellent film, combining cleaning with glass surface treatment.

The mouse-shaped design is easy to grip and use around edges and corners. The white marks left after application help identify treated areas for subsequent wiping. The product is designed to reduce repeated application; the original product information states that it saves at least one third of the application time compared with previous products.

The transparent film helps rainwater run off, reduces water droplets left behind and reduces the adhesion of snow, frost, dirt and dust. The formula also focuses on reducing condensation, icing and surface static, and is suitable for glass surfaces such as car windows, rear-view mirrors and lights.

Apply to clean glass, wait 5-10 minutes, then wipe off.

https://www.youtube.com/embed/j3JugKJ2WMU

First wash off dust and dirt from the glass surface, then wipe away all water droplets until completely dry Shake well before use, then unscrew the black knob at the bottom. Gently press the handle and allow the liquid to soak into the applicator pad at the front of the bottle, then apply a thin, even layer to the glass surface After applying to the entire surface, wait 5-10 minutes (judge according to how dry the glass surface actually is). Once the glass surface is completely dry, wipe it dry with a well-wrung damp towel

• Automotive glass surfaces.

• ●Make sure the liquid does not get onto any surface other than glass. It may cause coatings to peel off, so wipe it off immediately if it gets onto the bodywork.
• Do not use for any other purpose.
• Do not point the felt side towards anyone when opening the cap.
• Keep the felt surface away from your eyes to avoid splashes.
• Do not use in hot weather or when the glass is hot.
• Avoid application at temperatures below 10℃ or in rain. Apply while warming the glass with the heater or demister.
• Water droplets remaining on the glass will prevent good results, so wipe away all moisture and allow the surface to dry completely before use.
• If too much liquid is applied or it adheres firmly to other coatings, the liquid is likely to be repelled.
• On first use, good results may not be achieved if it adheres firmly to other coatings. In this case, remove the existing coating with a separately sold glass cleaner containing abrasives before applying this product.
• Do not leave the liquid on for too long, otherwise unevenly applied areas may become difficult to wipe off.
• If sand or small pebbles become attached to the felt, remove the felt and rinse it with water, wipe away moisture and allow it to dry completely before use, otherwise scratching may occur. (If moisture remains in the felt, adequate results cannot be achieved.)
• After use, fit the transparent cap to prevent evaporation and liquid leakage, tighten the screw cap (approximately one turn clockwise), then store.
• ●Do not inhale or drink: do not inhale or drink, as it is harmful to the body.
• People with sensitive skin may develop a rash, so wear protective gloves.
• Flammable; keep away from sources of ignition.
• Take care in backlit or dark conditions (such as in tunnels), as the glass may temporarily turn white. Activate the wipers immediately to ensure visibility.
• Keep out of reach of children.

Silicone resin, acid, alcohols, cleaning agent

Delivery available to a specified address, SF Locker or convenience store; free delivery on discounted merchandise totals of HK$200 or more, otherwise delivery charges are payable on receipt.